How To Solve The LED Fluorescent Glare And Flare Problems

In recent years, the strengthening of public awareness of energy saving and LED lighting technology matures, to some extent, contributed to the initial formation of the LED lighting market, and there is a growing trend.

For LED glare problems, the manufacturers have adopted a variety of approaches. Some use of PC mask with brushed, some use of frosted mask, some use of special phosphor materials, etc. However, these methods are not ideal, drawing mask can eliminate glare, but the flare phenomenon is more serious. People who are stay a little longer in this lamp their eyes will fatigue, if long in this lamp, can also lead to eye astigmatism. While use of the mask of cream and frosted will lose large lumens, the effect is bad.

LED lighting is one of the market has a bright future, Insiders suggest in the just formation of this market engineers should not only concerned about the efficiency of LED lamps, the luminous flux and life, but also do not ignore the LED lighting comfort issues.

However, after the adoption of optical films, visual observation feeling each LED is brighter, but not dazzling, the diaphragm made LED fluorescent light become more uniform and significantly wider viewing angle. The working principle of the diaphragm is the hash exposure to the diaphragm above of the LED light source change into a uniform surface light source output. So that can simultaneously solve glare, flare and wider the scope of the illuminated problems. In addition, the film transmittance above 90 is a limited impact on the light intensity.

Using an optical film, not only can eliminate the LED specific flare, but also the irradiation angle can be wider. As the LED fluorescent lamp is two rows or three rows of regularly arranged, so each spot light source emits light that may be has gaps, so that flare is generated within a certain distance. After using the optical film, the incident point source light will evenly spread, and becomes divergent light emitted, so that light becomes very uniform, completely solve the problem of flare.

In addition, LED directional light is very strong, the irradiation angle of about 120 degrees, it is prone to lighting blind. After using optical film, due to the unique optical diffusion film, the light irradiation range can be extended to 180 degrees, which can effectively eliminate the blind spot lighting.

LED lamp which with optical film, you can make use of the same number of LED fluorescent lighting in the same area of ​​space, using the patch LED fluorescent blind spot because there is no radiation, light uniformity, lighting effects are far more than ordinary LED lamp. And the larger the area of ​​lighting required, this advantage is more obvious.